how long does msi kombustor cpu burner take

If it's below 90% it's probably your cpu (and ram).īut it could also be some engine limitation, fps limiter, vsync etc.Ĭan you post a Screenshot if the memory tab too? If yes, then your 3080ti is the limiting factor. Then quickly check the Taskmanager chart and see if the 3080ti hit 90% load or more. Then go into your sim, drive a few laps in a scenario where you'd like more fps. It scales with the frequency so 60% load at only 200 mhz in desktop mode equals almost no load at all in 3d mode at 1900 mhz). Open Taskmanager, go to the performance tab and click on the graphics card chart. What you should do before overclocking or anything: But they need to suit your needs and the power drain (or the aggressiveness if the power peaks) of the cpu. So motherboards don't necessarily give any fps at all.

There's a big difference between a 10600k without heavy power peaks and the short boosts of a 10900k with 60% more cores and the new boosting technology. Mostly you only need expensive motherboards for features or when you have the highest end cpu and want to overclock it. The motherboard can only help to get the cpu more stable or higher ram clocks stable but from my experience it's no guarantee. I would start with 4.8 at 1.32v and see if that's stable.Ī great cpu would do 4.8 at 1.30v or 5.0 at 1.34v. Or a sweetspot where you have a nice clockspeed but can lower the vcore quite a lot. Most CPUs have some plateau/sweetspot where the next higher clockspeed needs a lot more vcore. maximum 24/7 vcore should not exceed 1.35v Often mce raises voltage and some other stuff which is why you should lock them before! Asus boards can also lock all cores at the same clock. then activate 'mce' = multicore enhancement. lock your voltages at defaults (type in the default value that should show next to the 'auto'). Lots of guides out there for the Intel CPUs from 8-10th gen (they're all the same basically.). I think your cpu should be able to easily hit 4.8 GHz on all cores. So on average your cores are at around 4.4 GHz, fluctuating up and down.įrom my experience with 9600k and 10600k, locking all cores at a high clock not only gives more fps, but also more consistent fps. You're saying that you don't have your 8700k overclocked yet. As you can see from Robert's chart, overclocking your cpu makes the biggest difference! Since you already have 4000 mhz ram, changing that won't make much of a difference.

How long does msi kombustor cpu burner take